ATV-SCHS Cable Hook Stopper Rubber Line Saver with Allen Wrench for ATV UTV Winches (Orange)

For Trucks Jeeps SUV ATV UTV ORV Vehicle Boat Car
Made of rubber, water repellent & abrasion resistant
Used to avoid the cable to pull the hook to the bottom and stop the hook from getting jammed into the roller. Eliminate wear & tear on the roller from the hook and reduce noises when working
All steel ropes, wires and synthetic cables up to 15/32″ in diameter (12mm). Allow the ATV cable to run freely and slide, whilst keeping the line tidy. Protect your winching gear like never before
Package includes two-piece design rollers with 4 machine screws and an Allen wrench
Color:Orange
Note: Wear leather gloves. 1)Freespool and pull out approx. 2 feet of cable. 2)Pull Hairpin and release clevis pin from hook. 3)Remove the four bolts fastening the two halves of the Split Cable Hook Stopper together. Place the cable or rope between the two halves. Insert the four bolts and tighten. 4)Re-attach hook to cable end. 5)To stow hook, engage clutch and retract cable onto spool until hook is snug against the hook stopper and fairlead. 6) Position hook stopper at approx. 3/4 of the total line distance towarhook while using you winch. Package Include: 1x two-piece design roller 4x screws 1 x hexagon wrench